1.4 TSI EA211 MQB Watercooler Block Off Plate Kit

Watercooler Block Off Plate Kit for 1.4 TSI EA211 MQB

Upgrade your 1.4 TSI EA211 MQB engine with our Watercooler Block Off Plate Kit. Commonly used when converting to an air-to-air front-mount intercooler solution to achieve significantly lower air intake temperatures, and therefore safely make more power.

For those utilising a remapped engine and especially those who have upgraded to a turbocharger, such as the IS12, IS20, or IS38, using our conversion kit, the factory watercooler located within the intake manifold can become overwhelmed by heat when full boost is achieved. This is due to the fact that compressed air results in increased temperatures, quickly overpowering the small watercooler inside the intake manifold.

Performance Improvement

Our own 250+ BHP 1.4 TSI EA211 MQB (CZCA) VW Scirocco GT build that uses an IS20 turbo, got upgraded to a simple air-to-air front-mount-intercooler (FMIC) setup, where we tested 3 different cooling setups. 

We ran the car from 3,000 to 7,000 RPM at full boost in 4th gear for about 15s each time using 3 different cooling setups to see which one achieved the lowest temperature inside of the intake manifold.

Note: The tests were conducted at different times in the year, at different ambient temperatures, so the results you see are with the ambient temperature taken out of the equation. For example, the Stock Watercooler result's raw data, including the ambient temp, was 51.8 °C and just 25.5 °C with the Standalone FMIC setup.

The results were evident, showing to us that the stock watercooling system was indeed completely overwhelmed when under load, even for an extremely short period of just 15 seconds. Thankfully, even with the ghetto air-to-air intercooler core that we used, we managed to more than half the intake temperatures which is phenomenal! You could very likely achieve even better results with a higher-quality intercooler core!

📦 What's Included

• 1x High on Boost Watercooler Block Off Plate for 1.4 TSI EA211 MQB
• 3x Coolant Hose Spring Clamps
• 1x Coolant Hose Joiner
• 1x Coolant Hose End Cap

🛡️ Warranty & Guarantee

1-Year Warranty. Backed by our 12-month limited warranty against defects.

Covered:
• Repair or replacement if the part develops a manufacturing fault.

Not Covered:
• Labour or fitting costs.
• Damage from improper installation, accidents or misuse.

✅ Compatibility

✔️ Fits EA211 1.2 & 1.4 TSI Engines with the following engine codes:
CZCA, CHP, CMB, CPT, CPV, CXS, CZC, CZE, CZEA, CZD, CZT, CTE

🚗 Vehicle Compatibility (2012–2020 MQB platform):

• VW Golf MK7 / MK7.5 1.4 TSI (2012–2020)
• VW Polo MK6 1.4 TSI (6C) (2014–2017)
• VW T-Roc 1.4 TSI (2017–2020)
• VW Tiguan MK2 1.4 TSI (2016–2020)
• VW Touran 1.4 TSI (2015–2020)
• VW Scirocco MK3.5 1.4 TSI (Facelift models, 2014–2018)
• Audi A1 1.4 TFSI (8X) (2010–2018)
• Audi A3 1.4 TFSI (8V) (2012–2020)
• SEAT Leon MK3 1.4 TSI (5F) (2012–2020)
• SEAT Ibiza MK5 1.4 TSI (6P) (2015–2017)
• Skoda Octavia MK3 1.4 TSI (5E) (2013–2020)
• Skoda Superb MK3 1.4 TSI (3V) (2015–2020)
• Skoda Karoq / Kodiaq 1.4 TSI (2017–2020)

❌ Not compatible with:

• Not compatible with EA111 Engines
• Not compatible with EA113 Engines
• Not compatible with EA211 EVO 1.5 TSI Engines
• Not compatible with EA888 Engines

If unsure, drop us a message with your reg, we’ll confirm fitment fast.